Diamond 2in1 Ready To Use (RTU) 500ml

Quick and thorough cleaning made easy
Apply or spray a 5% (1:20) solution onto the surface to be protected. No reaction time is required, also rubbing, buffing, or polishing is not necessary.

Compared to competitor products Permanon is simple in use as it cleans and protects in one step. This gives you brilliant shine and protection. Moreover, follow-up maintenance/cleaning become easier more than 80%.  

• First-time application: mix PERMANON (3-5%) with water.
• For shine-renewing a 2-3% solution is sufficient.

• After mixing with normal tap water the application solution is stable for about three weeks.
• 1 liter concentrate produces 50 liters of ready-to-use solution at a concentration of 2%.

Concentrate or Ready to use:
Permanon products are highly concentrated and, therefore, must be diluted before use with water. Ready to use products, however, are prefabricated solutions immediately ready for use.

All Permanon products are concentrates and are mixable with regular tap water at 3-5%. This means 5% that is 50 ml must be taken from the concentrate and must be diluted with 1.000 ml water. A mixing rate of 3% equals 500ml which produces about 17 liters ready-to-use solution. Important: the solution freshly prepared with tap water is stable for about three weeks.

In the line of Permanon Diamond we offer the product Ready to use, and, therefore, a prefabricated solution immediately ready for use is available. With 500 ml Ready to use an area of up to 50 sqm can be treated. Important: this application solution has been produced with medicinal water and can therefore be stored for approximately 1 year.